Changing The Number Of Partition Backups - Siemens SINUMERIK 840Di Manual

06.03
Storing a partition
backup
15.3.8

Changing the number of partition backups

 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
When saving a partition C:, E: and F: an independent image file with the name
of the partition backup in front of it is created under D:\IMAGES for each of the 3
saved partitions, e.g.:
– for partition C: IBNZWST.GH1
– for partition E: IBNZWST.GH3
– for partition F: IBNZWST.GH4
When restoring the partition backup, however, the 3 individual files will be ad-
dressed as one partition backup with the description entered under Point 6.
From the menu displayed in the Subsection 15.3.7 under Point 4. (page
15-493), select
Ghost Connection Mode:
Maximum Backup Images:
Actual Backup Images:
PLEASE SELECT
1 Configure Ghost Parameters
2 Partitions Backup, Mode LOCAL
3 Partitions Restore, Mode LOCAL
4 Delete Image
9 Back to previous Menu
Your Choice [1,2,3,4,9]?
the menu option Configure GHOST Parameters using key "1".
Following menu:
PLEASE SELECT
1 Change Maximum Backup Images
9 Back to previous Menu
Your Choice [1,9]?
Choose the menu item Change Maximum Backup Images using key "1".
Type the new number in the following menu and confirm the question: "Save
GHOST parameters" with "Yes".
15 SW Installation/Update and Data Backup
LOCAL
<max. Anzahl>
<akt. Anzahl>
15.3 Data backup
15-495