Mitsubishi Electric GOT1000 Series Connection Manual page 53


RS-422 interface
Use the following as the RS-422 interface and RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
RS-422 conversion unit
*1
GT16
GT14
GT12
GT115 -Q
GT105 -Q
GT104 -Q
GT1030, GT1020
GT15-RS4-9S
GT01-RS4-M
*1 When connecting to the RS-422/485 interface, use HDR-E14MAG1+ as a cable connector.
To use HDR-E14MAG1+, a dedicated pressure welding tool is required.
For details on the connector and pressure welding tool, contact Honda Tsushin Kogyo Co., Ltd.
*2 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the GT1030, GT1020.
(2) Connector pin arrangement
GT16
GOT main part connector
see from the front
8
1
14-pin (female)
Connector type
9-pin D-sub (female)
M2.6 millimeter screw 17LE-13090-27(D2AC)
fixed type
14-pin (female) HDR-EC14LFDT1-SLE+
9-pin D-sub (female)
M2.6 millimeter screw 17LE-13090-27(D3AC)
fixed type
*2
MC1.5/9-G-3.5BK
9-pin terminal block
9-pin D-sub (female)
M2.6 millimeter screw 17LE-13090-27(D3AC)
fixed type
GT15, GT14, GT12, GT11, GT105 ,
GT104 , GT01-RS4-M
GOT main part connector
see from the front
14
7
9-pin D-sub (female)
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
Connector model
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
PHOENIX CONTACT Inc.
DDK Ltd.
5 1
9 6
Manufacturer
GT1030, GT1020
See from the back of a
GOT main part
9-pin terminal block
1 - 25
1
2
3
4
5
6
7
8