Connection Diagram; Coaxial Cable - Mitsubishi Electric GOT1000 Series Connection Manual

14.3 Connection Diagram

The coaxial cable used for connecting the GOT to a video
camera should be prepared by the user.
The following shows each cable connection diagram.

14.3.1 Coaxial cable

The following shows the connection diagrams and
connector specifications of the coaxial cable used for
connecting the GOT to a video camera.

Connection diagram
Coaxial connection diagram 1)
Displaying video image on GOT
75Ω drohmcoaxial
GOT side
Signal
BNC connector
GND
Cable specification
Item
Applicable cable 3C-2V, 5C-2V (JIS C 3501 compliant)

Connecting the BNC connector to the coaxial
cable
For connecting the BNC connector and coaxial cable,
refer to the following.
1.4.2 Coaxial cable connector connection
method

Precautions when preparing a cable
(1) Cable length
The cable length differs depending on the specification
of the video camera to be used.
Create a cable under the specification of the video
camera.
(2) GOT side connector
Use the following as the multimedia unit connector.
For the GOT side connector of the coaxial cable, use
the ones compatible with the GOT connector.
Connector
GOT
model
GT16M-MMR 227161-4
(3) Video camera side connector
Use a connector compatible with the video camera to
be used.
14 - 4
14. MULTIMEDIA CONNECTION
14.3 Connection Diagram
Video camera/
vision sensor side
Signal
BNC connector
GND
Specifications
Connector
Manufacturer
type
BNC Tyco International, Ltd.
HINT HINT HINT
When the coaxial cable is long
When the coaxial cable is long, video signals are
attenuated by the cable.
The use of a video signal amplifier is recommended to
correct the attenuated signals.
Connect a video signal amplifier in reference to the
following:
• Coaxial cable: The cable length is 100m or more
when 3C-2V is used.
• Coaxial cable: The cable length is 200m or more
when 5C-2V is used.