Table of Contents
Advertisement
4 - 30 FX Series RFID Readers Integrator Guide
File Upload
•
Click
Choose
•
Click
Start Update
the files listed in the Response.txt file are downloaded, validated, and programmed into flash. The reader
reboots. If all the files are not downloaded or are corrupted during the download, they are not programmed
into flash, and the old partitions remain.
Partition download and flash programming takes about 15 minutes. Do not reboot or power off the reader while the
green LED is blinking.
File Based Firmware Update Window
Figure 4-28
to browse to and choose a cab file containing the incremental updates for the reader partitions.
to load the firmware and write the new files onto the flash. The application shuts down and
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
