Chapter 1 Quick Start; Introduction; Quick Start Demonstration; Step 1, Setup - Motorola fx7400 Integrator Manual

Chapter 1 Quick Start

Introduction

This chapter provides a Quick Start setup demonstration.

Quick Start Demonstration

The Quick Start demonstration offers a simple, temporary way to quickly set up the reader and read tags. The
demonstration includes:
•
Step 1, Setup on page 1-1
•
Step 2, Host Name Connect on page 1-2
•
Step 3, First Time / Start-Up Login on page 1-3
•
Step 4, Set Region on page 1-4
•
Step 5, Read Tags on page 1-7

Step 1, Setup

Unpack the reader. See
1.
Set up the reader and tags on a desktop.
2.
Connect the antenna to antenna Port 1. See
3.
Connect the AC power supply to a power outlet and connect to the power port. See
4.
Wait for the green power LED to stay lit. See
5.
details.
Connect the Ethernet cable to the Ethernet port. See
6.
Connecting the reader to a subnet that supports DHCP is recommended. This Quick Start procedure is not
guaranteed to work if DHCP is disabled in the reader and if the reader is connected directly to a PC.
Unpack the Reader on page
Figure
System Start-up/Boot LED Sequence on page 3-5
3-1.
1-1.
Figure 1-1.
Figure 1-1.
for boot-up