Table of Contents
Advertisement
4 - 18 FX Series RFID Readers Integrator Guide
Read Tags
Click
Start Inventory
NOTE Enable JVM support on the browser in order for this page to function properly. See
Upgrade
The polling state displays the current polling setting (
Enabling polling from the
polling from byte stream displays the
Read Tags Window
Figure 4-20
•
Start Inventory
•
Stop Inventory
•
Clear Tag List
The list of tags appears in a table with the following attributes for each tag:
•
- Unique tag EPC ID.
EPC Id
•
TagSeen Count
•
- Received Signal Strength Indication.
RSSI
•
- Antenna ID on which the tag is seen.
Antenna Id
•
time stamp - UTC time (in microseconds) when the tag was first seen.
FirstSeen
•
time stamp - UTC time (in microseconds) when the tag was last seen.
LastSeen
to initiate an on-demand scan and/or to enable and disable polled read points.
Procedures.
console displays the
Administrator
Polling State: Enabled from byte stream
- Starts inventory operation on the connected antennas.
- Stops the ongoing inventory operation.
- Clears the current tag list.
- Number of times the tag has been identified on the specific antenna.
or
).
Enabled
Disabled
Polling State: Enabled from Web
message.
Appendix C, Java
message. Enabling
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
