1MRS756567
3.4.
3.4.1.
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Configuring objects
General information about configuring objects
After the objects have been added, configure the object properties. Figure 3.4.1-1 shows
an example of how to use SAB600 to configure the object properties for DNP OPC
Server.
To configure an object:
1. Select an object in the object tree of the communication structure.
2. The object properties appear now in the Object Properties window. The properties
and their values can be viewed as shown in Figure 3.4.1-1.
Figure 3.4.1-1 Example of object properties in the Objects Properties window
3. Select the property you want to configure. Depending on the property value type,
configure by:
•
Selecting a predefined value from a drop-down menu, or
•
Entering a text string or a numerical value in a text field.
The available properties for different objects are listed in the following subsections.
SAB600_DNP_Serial_Slave_Object_Properties.png
19