NEC UNIVERGE UM8000 User Manual page 41

Adding or Removing Language Packs
Languages in the messaging system can be added and removed. You must have the appropriate licensing to install new
languages.
NOTE
T
HE MESSAGING SYSTEM MUST BE LICENSED FOR THE NUMBER OF LANGUAGES INSTALLED
EACH LANGUAGE PACK REQUIRES ADDITIONAL DISK SPACE
To add a language pack
In the Navigation Pane, click System > Configuration > Languages.
1.
For detailed information about the fields, see the
Click Browse to select a language to install.
2.
The Choose file dialog box appears.
In the Choose file dialog box, browse to the location where the language packs are installed.
3.
Select the language file.
4.
Click Open.
5.
The Choose file dialog box closes and Install Language appears.
Click Install Language.
6.
The Updating... button appears. It takes a few minutes for the language pack to install. When the installation is
complete, the new language appears in the list of languages.
Click Restart to restart the messaging system.
7.
The Server control page appears and both the Start and Stop buttons are grayed out while the server shuts down.
To remove a language pack
In the Navigation Pane, click System > Configuration > Languages.
1.
The installed language packs appear on the languages page.
CAUTION!
O
NLY LANGUAGES THAT ARE NOT ACTIVE CAN BE REMOVED FROM THE MESSAGING SYSTEM
UNCHECK THE SYSTEM AND HOTEL SELECTIONS
TELLING YOU THAT THE MESSAGING SYSTEM MUST BE RESTARTED
Click Remove next to the active language.
2.
An alert message appears asking if you want to remove the language pack.
Click OK to remove the language pack.
3.
Related Topics
Viewing the Installed System Languages
Displaying and Updating Licensed Features
System Configuration
.
System > Configuration > Languages
. T Remove
HE BUTTON APPEARS NEXT TO THE LANGUAGE AND AN ALERT APPEARS
.
. W
HEN ADDING LANGUAGES KEEP IN MIND THAT
table.
. I
F A LANGUAGE MUST BE REMOVED
,
41