13.3 GOT Side Settings
13.3.1 GOT Mobile setting
1.
Select [Common] → [GOT Mobile Setting] from the
menu.
2.
Check the [Use GOT Mobile function] of [GOT Mobile
Setting] to set.
For details on the settings, refer to the following
manual.
GT Designer3 (GOT2000) Help
Click the [OK] button when settings are completed.
13 - 4
13. GOT Mobile CONNECTION
13.3 GOT Side Settings
13.3.2 Setting communication
interface (Communication
settings)
When using the wireless LAN
For using the system configuration given in this chapter
(
13.2 System Configuration), the wireless LAN
setting is required. For details of the setting, refer to the
following.
19. WIRELESS LAN CONNECTION
When using the Ethernet connection cable
Ethernet communication drivers must be set on the
GOT, and set the Communication settings.
(1) Ethernet communication driver setting
2.
1.
Select [Common] → [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
3.
4.
Click!