Got Side Settings; Setting Communication Interface (Communication Settings); Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

7.4 GOT Side Settings

7.4.1 Setting communication interface
(Communication settings)
Set the channel of the equipment to be connected to the
GOT.
2.
1.
Select [Common] → [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: PROFIBUS
• Controller Type: PROFIBUS DP
• I/F: Interface to be used
• Driver: PROFIBUS DP
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.

7.4.2 Communication detail settings

Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
Make the settings according to the usage environment.
3.
4.
Click!
7.4.2 Communication detail settings
Item Description
Set the station No.
Station No.*1
(Default: 1)
Set the following format.
Format 1: Big endian
Format*2
Format 2: Little endian
(Default: 1)
*1 Align the setting with the station No. of the slave equipment
set on the master equipment side.
*2 Align the setting with the specification of the PROFIBUS DP
master equipment.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
7. PROFIBUS DP CONNECTION

7.4 GOT Side Settings

Range
1 to 125
1, 2
7
7 - 5