Siemens HiPath HG 1500 Service Manual page 33

lan2de.c03
Startup
Configuration for gatekeeper mode
Configuring services
Step
1. Press the Services button and then click Add.
2. Under Description, enter a description for the service, e.g. "Hicom 150 E".
3. Under Prefix, enter the correct code, which must match the gateway prefix
set up in the HLB2, e.g. "0" (only digits, possibly more than one).
4. Enable Allow as default for online endpoints if the service is to be as-
signed to all endpoints registered at the gateway (otherwise, the service
will need to be individually assigned to each endpoint that may use it).
5. Enable Allow for public endpoints from other zones if endpoints from
other H.323 zones may use the service.
Configuring neighbors
Step
1. Press the Neighbors button and then click Add.
2. Under Description, enter a description for the other zone, e.g.
"Department XYZ".
3. Under IP address, enter the IP address of the gatekeeper for the other
zone.
Note
Detailed configuration examples can be found in the Administration Manual for HiPath
HG 1500 (A31003-K5020-B811-*-7619).
3-8
Task
Task
A31003-K5020-S100-4-7620
For internal use only
Service Manual