Operating Environment; Ruggedcom Ape Specifications - Siemens RUGGEDCOM RX1501 Installation Manual

Chapter 4
Technical Specifications
Module
W21, W22, W32 (Second Radio)
Section 4.7

Operating Environment

NOTE
The ambient operating temperature is reduced for devices equipped with a cellular modem. For more
information, refer to
Parameter
Ambient Operating Temperature
Ambient Relative Humidity
Ambient Storage Temperature
i
Maximum ambient operating temperature is 70 °C (158 °F) when the device is installed along with Underwriter Laboratories (UL) listed devices.
Section 4.8

RUGGEDCOM APE Specifications

Feature
Processor
RAM
Disk
Networking
USB
Video
LED Indications
Controls
Temperature Range
Power Requirements
Software Platform
42
Section 4.6, "Cellular Modem
-40 to 85 °C
(-40 to 185 °F)
5% to 95%
-40 to 85 °C
(-40 to 185 °F)
APE1402 APE1402W7
Intel Atom E660 1.3 GHz, 512 KB L2 Cache
2 GB DDR2, 800 MHz, 32-bit
8 GB SATA, solid state
Realtek RTL8111, RJ45 Gigabit Ethernet interface
2 x USB 2.0, maximum combined USB device power consumption 500 mA at 5 V
Intel 4108 Grpahics Processor, DVI-D
Power and Disk
Momentary contact reset button
-40 to 70 °C (-40 to 158 °F)
12 W with no USB load, 14.5 W with full USB load
Debian Linux® Windows®
Embedded Standard
7
Operating Temperature
60 to 75 °C (140 to 167 °F)
-30 to 60 °C (-22 to 140 °F)
60 to 75 °C (140 to 167 °F)
Specifications".
Range Comments
Measured from a 30 cm (12 in) radius surrounding the center of the
i
enclosure.
Non-condensing
APE1404
Intel Atom E660T 1.3 GHz, 512 KB L2 Cache
16 GB SATA, solid state
Debian Linux®
RUGGEDCOM RX1501
Installation Guide
Compliance
Reduced Radio Frequency (RF)
performance
Full Radio Frequency (RF) compliance
Reduced Radio Frequency (RF)
performance
APE1404W7 APE1404CKP
Windows® Check Point GAiA™
Embedded Standard OS
7
Operating Environment