Cellular Modem Modules - Siemens RUGGEDCOM RX1501 Installation Manual

RUGGEDCOM RX1501
Installation Guide
State
Green
Off
For specifications on serial ports, refer to
For information about how to connect devices configured to run in RS485 mode, refer to
"Connecting Multiple RS485
The following are the pin-outs for the RJ45 connectors:
8
Figure 42: Serial RJ45 Port
b
Pins 7 and 8 are connected together internally.
Section 3.6

Cellular Modem Modules

The RX1501 supports the following cellular modem line modules for operation on GSM, EDGE, HSPA+, or CDMA
networks:
DANGER!
Radio interference hazard – risk of death, serious personal injury or equipment damage. Do not
operate the cellular modem in the following areas:
• Areas where explosives are actively used
• In explosive atmospheres, such as refueling stations, fuel depots, chemical plants, underground
mining operations, etc.
• Near medical or life support equipment or devices
• In any aircraft, whether in flight or on the ground (unless permitted by the aircraft operator)
Cellular Modem Modules
Section 4.3, "Copper Serial Port
Devices".
1
Description
Activity detected
No activity
Specifications".
Pin RS232 Mode
1
2 Reserved (Do Not Connect)
3
4
5 RX (Receive)
6 TX (Transmit)
b
7 Note
b
8 Note
Shield
Communication Ports
Section 3.10,
RS485 Mode RS422 Mode
RX- (Receive
Negative)
Common (Isolated) Ground
RX+ (Receive
Negative)
TX/RX+ TX+ (Transmit
(Transmit/ Positive)
Receive
Positive)
TX/RX- TX- (Transmit
(Transmit/ Negative)
Receive
Negative)
Chassis Ground
Chapter 3
25