About This Document - Siemens FT2010 Operation Manual

1 About this document

Target group
Operating personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes the operation of the floor repeater terminal FT2010 in a
fire detection system. The reader shall become familiar with the possible
indications and operating functions on the terminal, as well as with the functionality
of the terminal in the overall system. This understanding makes an adequate
behaviour possible in the event of fire or fault.
Scope
This document applies to the floor repeater terminal type FT2010.
Target groups
The information in this document is intended for the following target groups:
Activity
Carries out procedures to correctly
operate the product.
Configure the product at the place
of installation according to
customer-specific requirements.
Check the product operability and
release the product for use by the
operator.
Searches for and corrects
malfunctions.
Carries out all maintenance work.
Checks that the products are in
perfect working order.
Searches for and corrects
malfunctions.
Reference document and source language
The source language of this document is German (de).
The reference version of this document is the international version in English.
The international version is not localized.
The reference document has the following designation:
ID_x_en_--
x = version, en = English, -- = international
About this document
Displays used in document
Qualification
No particular basic training is needed.
Has been instructed by the commissioning
personnel.
Has obtained suitable specialist training for
the function and for the products.
Has attended the training courses for
commissioning personnel.
Has obtained suitable specialist training for
the function and for the products.
1
5
009310_i_en_--
2013-11-14