Hitachi IJ UX Instruction Manual page 36

Ink ejection for maintenance
Use this procedure when you want to eject ink from the nozzle for a purpose other than printing.
(Use only during maintenance. To print, press the STARTUP
Press the STARTUP
Ink Jet Startup Confirmation
Solution 1. To change the printer status to Ready, press <Ready>.
● Operation can be aborted by pressing the Cancel at the "Ink Jet Startup Confirmation message".
● If the print head cover installed, the printer will not enter the Ready state even if this operation is
performed. (Enters the Standby state)
3-9 ●Start operation
→ Eject ink .
TEST
START PRINTING
SETTINGS
The ink jet will be turned ON.
2. To change the printer status to Standby, press <Eject ink>.
Ready
→ Ready .
Press STARTUP .
STARTUP
LOGIN
CONFIRMATION
Eject ink
Press Eject ink .
×
No.050
Cancel