Set The Print Specifications - Hitachi IJ UX Instruction Manual

4.14 Set the print specifications

4.14.1 Set the character height, character width, and orientation
(1) Function
●Sets the character height, character width, character orientation, and print start.
Print specifications
Screen
Message name [ ]
switching
1st screen
Character
orientation
Printing method １（１：Single scan ２：Interlaced ３：Mixed）
Print start
delay
Print start delay
Character height
1
●The character height can be specified.
Ink drop use percentage
2
●Sets the ratio of drops used in printing. For example, ink drop use 1/3 prints at a ratio of 1 in 3 ink
drops. The 2 ink drops are recovered from the gutter.
Model type
UX-B 1/3 to 1/16 1/3 to 1/16 1/4 to 1/16
UX-D 1/2 to 1/16 1/2 to 1/16 1/2 to 1/16 1/3 to 1/16 1/3 to 1/16 1/3 to 1/16 Option : Up to 1/1
UX-E 1/1 to 1/16 1/1 to 1/16 1/1 to 1/16 1/1 to 1/16 1/3 to 1/16 1/3 to 1/16
●When ink drop use is 1/1 or 1/2, high speed printing is possible. For ink drop use 1/16, low speed
printing is performed and the print quality improves.
●When Format setup is Free layout on the Change message screen, setting range of ink drop use
percentage is 1/2 to 1/16.
●When a character size 30
becomes 1/5 to 1/16.
Character width
3
●The character width can be specified.
●The character width setting range is from 0 to 3999.
●When the product speed matching feature is incorporated (when the rotary encoder is connected),
set the character width as indicated below.
Ink drop use percentage setting
1/3 to 1/16
For rotary encoder wiring and setup, see the Technical Manual "4.3.2-1 Rotary encoder
●
specifications, wiring and switch setting".
[Stop ]
2nd screen 3rd screen
Character height
Ink drop use
００００
Character width
0:ＡＢＣ 1:ＡＢＣ 2:
→ ← ←
Sensor Print start
００００
（0∼9999）SC
Setting range of ink drop use percentage
1 line 2 lines
40 or 36
×
1/1
1/2
2015.07.07 12:45
Com=0
Makeup Ink
Manual
８５
（0∼99）
０３
（1/1∼1/16）
（0∼3999）
Arrow : Prin-
3:
→
ting direction
message
Change unit
3 lines 4 lines
-
48 print item was set, the settable ink drop use percentage
×
Character width setting
002
001
000
Startup
HOME
Edit
Print
Changes the print start
format
delay input units.
Back
5 lines 6 lines
- -
●Set the print specifications 4-78
Notes
-
-