Hitachi IJ UX Instruction Manual page 142

Character orientation
4
●Printing direction of characters can be set.
●Settings and print results are as shown below.
Setting
0 : A B C
1 : A B C
2 :
3 :
Printing method
5
●Two printing methods are selectable: "single scan", "interlaced" and "mixed".
●A printing method will be automatically selected in accordance with the print format setup and
the ink drop charge rule.
●When making interlaced prints, perform the following setup.
(i) Ensure that the same print format is employed for all items.
(ii) Ensure that the same line count setting is employed for all columns.
(iii) The ink drop use percentage is 1/1 to 1/4.
●In the case of free layout, printting method is single scan fixed.
4-79 ●Set the print specifications
Direction of transport
a←
→
→b
a←
←
→b
a←
←
→b
a←
→
→b
Icon Ink Drop Charge Rule Classification
Single Single
Standard (Single scan)
scan scan
Standard (Interlaced),
Inter-
laced
Dot mixed interlaced
Mixed single scan and interlaced
Mixed
Perform overall column setup. The format for the first item is
then applied to all the other items so as to provide interlaced
setup. When making a 1-line print, the single scan predominates
even if you perform steps (i) through (iii) .
Printing results
A B C 1 2 3
3 2 1 C B A
3 2 1 C B A
A B C 1 2 3
A B C 1 2 3
A B C 1 2 3
Display of Printing method
When there are multiple printing lines,
multiple lines are printed in turn.
Multiple lines are printed at the same
time.
Printing is done while switching
between single scan and interlaced for
each column.
a
Direction of transport
b
Example of setting "0:ABC→"
and Direction of transport "a".
Printing method