Hitachi IJ RX2 Technical Manual page 28

Press Using environment setup .
2
The Using environment setup screen is displayed.
When "Disable" is selected,
the Print description screen
is immediately displayed
when the power is turned on.
Specifies the login user
Press Login method Enable .
3
When "Enable" is selected,
selects the user which logs
in when the power is turned
on.
Select the login method and press OK .
4
Sets whether or not to select a user which logs in when power is turned on.
When the Login method is "Enable", the Select login user screen is displayed when the power is turned
on. At this time, if the set password is forgotten, the program will not advance to the print description
screen. Set and manage the password carefully.
If you forget the password, consult your nearest local distributor.
3-10 ●Selecting user when power is turned on
Using environment setup
Disable Enable
Login method
Default login ID : 1 admin
Administrator Automatic Deselect
Using environment setup
Login method Disable Enable
Administrator Automatic Deselect
CAUTION
[Stop ]
Com=0
Disable Enable
[Stop ]
Com=0
Disable Enable
2015.07.07 12:45
M
Startup
Manual
HOME
Cancel
OK
OK
2015.07.07 12:45
M
Startup
Manual
HOME
Cancel
OK
OK