Description Of Functions - Hitachi IJ RX2 Technical Manual

5.9.2 Description of Functions

(1) Application procedure
● Prepare the following in advance:
No.
1 Specify "overwrite-enabled" for communication mode on the communication environment screen.
In addition, specify "t=fixed" for print message transfer ACK.
2 Set the buffer function on the second page of the communication environment setting screen to
"enable."
3 Confirm the setting values for "Buffer repeat count", "Empty Buffer Fault", "Timing of Fault" and
"Data number at Fault" on the second page of the communication environment setting screen.
Setting items
Buffer function
Buffer repeat count
Empty Buffer Fault
Timing of Fault
Data number at Fault
Comm. env. setup
Buffer function
Buffer repeat count
Empty Buffer Fault
Timing of Fault
Data Number at Fault
● The function (application) will be valid only when the printer is online and in the ready status.
Offline will set to standard-mode printing.
● The following shows the application procedure :
No.
1 Switch to online.
2 Set to the ready status.
Transmit print contents accordingly so that print contents sent at least N times remain in the buffer.
3
(N: Data number at Fault)
4 Print.
5 Subsequently repeat steps 3 and 4 above.
Preliminary Preparation Items
Setting items of communication environment setting screen
Selects enable/disable for buffer function.
Sets how many times printing is to be executed before switching the
printing contents.
Selects whether or not communication buffer errors are to be
generated. The conditions for occurrence are set by "Timing of
Fault" and "Data number at Fault".
Selects timing by which communication buffer errors are to be
generated.
Sets the number of print data items by which a communication
buffer error is to be generated.
[Stop ]
Disable Enable
０００１
(1∼9999)
Disable Enable
Print Start
0 (0∼9)
Application Procedure
Procedure
Description
2015.07.07 12:45
Com=0
M
Manual Startup
Print. Complete
Prev.Dsp. Next Dsp.
Back
Procedure
Procedure No.1 and 2 can be in random order
Initial values
Print Start
HOME
●Communication Buffer 5-63
Disable
1
Disable
0