Personal Custom Service - Panasonic KX-TVM50 Programming Manual

2.1.8

Personal Custom Service

Personal Custom Service
Specifies the Personal Custom Service. The System Administrator can assign an operation to each
key.
Note
• These settings can be changed by subscribers.
• Make sure to add a Trunk Access number when you store an outside telephone number.
• When the VPS calls a Trunk via a PRI (ISDN Primary Rate Access Interface) card of a
Panasonic PBX, please be sure to add "#" after the telephone number (1112223333 in the
example here):
Example: 9P1112223333#PP123PP456PPX# (P: Dial Pause)
Follow the steps below to edit Personal Custom Service:
1.
Click Click to Edit....
Key Assignment
1.
Select the desired key.
2.
Assign the operation in Assigned Operation and enter the setting in Value according to the
operation.
Outside Numbers
1.
Enter outside numbers to be transferred.
2.
Select "Recording", "Disconnect (All Day)", or "Disconnect (Only After Hours)" for No DTMF
Input Operation.
2.
Click OK.
Value Range
<Key Assignment>
Key: 3–9, 0
Assigned Operation:
Transfer to specified mailbox: Allow the caller to leave messages in a specified mailbox.
Transfer to specified extension: Transfers the caller to a specified extension.
Transfer to Voice Mail Service: Allows the caller to access Voice Mail Service.
Transfer to Automated Attendant Service: Allows the caller to access Automated Attendant
Service.
Transfer to specified Custom Service menu: Transfers the caller to the Custom Service
specified here.
Transfer to operator: Connects the caller to an operator.
Transfer to outside (specified number): Transfers the caller to a specified outside telephone
number. Enter the PBX Trunk Access Number such as 9.
Page the party: Pages the subscriber.
Repeat greeting: Repeats the greeting.
None: No operation assigned
<Outside Numbers>
Outside Number #1–#4: Max. 32 digits consisting of 0–9,
2.1 Mailbox Settings
, #, and special codes
Programming Manual 53