1.4
Connect
The Connect menu allows you to directly program the VPS in Interactive mode. When connecting,
you are required to enter the password corresponding to the administrator password entered when
starting KX-TVM/NCV Maintenance Console.
1.4.1
Connect—USB
Connects to the VPS through the USB port on the VPS.
To connect using USB
1.
From the Connect menu, select USB.
2.
Enter the administrator password used to log on to KX-TVM/NCV Maintenance Console.
3.
Click Next, and Finish when the connection is completed.
1.4.2
Connect—LAN (Optional for KX-TVM50)
Connects to the VPS through the LAN port of the VPS.
Note
•
Before you connect to the VPS via LAN, you must first assign an IP address to the VPS. See
"1.8.12 Utility—LAN Settings" to assign an IP address.
To connect using a LAN
1.
From the Connect menu, select LAN (TCP/IP).
2.
Enter the administrator password used to log on to KX-TVM/NCV Maintenance Console and IP
Address.
3.
Click Next, and Finish when the connection is completed.
1.4.3
Connect—Modem (optional)
Connects to the VPS through the modem.
Note
•
To access the VPS remotely using this feature, a remote modem card must be installed. For
more details, see "2.7.5 Modem Card (KX-TVM296)" in Installation Manual.
•
To connect to the VPS using a PC with an external modem, you need to upgrade the KX-
TVM/NCV Maintenance Console software on the PC connected to the VPS.
The following settings must be entered to match the settings of the modem and/or PC.
Setting
Phone No.
Port No.
Values
–
–
Description
Enter the phone number to dial into the VPS.
Specify the number of ports.
1.4 Connect
Programming Manual
17