Panasonic KX-TVM50 Programming Manual page 124

2.5 System Parameters
System External Message Delivery Duration Time
Specifies the maximum length of External Message Delivery calls. The timer begins counting when
the called party answers the call, and if the caller has not pressed the appropriate dial key to initiate
message playback, the VPS terminates the call when this timer expires.
Value Range
1 min–9 min
Feature Manual References
2.3.11 External Message Delivery Service
Company Telephone No.
Specifies the company's telephone number. When the recipient has failed to retrieve the sender's
message because of he or she did not enter the correct password, the VPS announces the
company's telephone number to the caller. The caller can later call the company for assistance or to
speak to the message sender.
Value Range
Max. 32 digits
Intercom Paging Parameters
VPS Intercom Paging functions in conjunction with the Intercom Paging feature of the PBX. It allows
the VPS to page the called party (announce the caller's name, line number, etc.) while the caller is
placed on hold. To utilise this feature, Intercom Paging must be available for the PBX, and the VPS
must be properly programmed. This feature is available for APT/DPT Integration only.
Intercom Paging Sequence
Specifies the intercom paging sequence used to activate the Intercom Paging feature of the PBX. The
settings made here must match the settings of the PBX. The sequence can be a combination of 7
letters and 12 dial codes.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
X: Pager Dialling
0–9, , #: Dial Codes
Feature Manual References
2.2.25 Intercom Paging (APT/DPT Integration Only)
124 Programming Manual
, # and special codes