Toshiba strata DK8 Installation Instructions Manual page 315

NOTES:
1.
2.
3.
4.
5.
6.
7.
PROGRAMMlNGPROCEOURES-INSTRUCTIONS/SYSTEMRECOROS
SECTION lOO-816-302
MARCH1993
PROGRAM31
STATION CLASSOFSERVICE
SELECT = Logical Port Number(s) -
Enter the Logical Port number(s) to which class
of service must be assigned.
See Note 3 for entering a range of ports.
I- Button/L EDs
Light LEDs for the port
specified in the last step. All
buttons/LEDs marked with an
"X" in the table below should
NOTE: Shaded areas apply to DK16 only
be lit.
For more information, see the instructions preceding the record sheets.
Initialized data reads LED 10 ON for all ports.
A range of ports may be specified by entering:
00~00
Low PZJ-
L,h port
If Button/LED 15 is lit, Button/LED 17 must be lit.
If Button/LED 19 is lit, Button/LED 17 must be lit.
If Button/LED 20 is lit, Button/LEDs 17 and 19 must both be lit.
Voice Mail (VM) to VM call block should be ON for all VM (QSTU, KSTWPSTWPESU) ports if the VM/Auto Attendant
machine does supervised and/or screened transfer.
Block Exec./Priv. override (LED 18 ON) prevents Privacy Override to the selected station unless the
Privacy Release button is ON at that station; this option (LED 18 ON) prevents Executive Override to the station under
all conditions.
Button/LED 10 enables (disables) a telephone to receive an All Call page. All telephones can initiate an All Call page.
2-67