Setting The Remote Access Function - Bosch BPT-S 5 Hybrid User Manual

English
Bosch Power Tec GmbH
6.8: Number pad for entering the password
7. Enter the password (You can obtain this password
from the manufacturer's technical service. This
password is only valid for one day).
8. Press OK
■
The system settings have been changed.
6.8

Setting the remote access function

You are also able to access the storage system
overviews and data via a connected PC. The remote
access function is automatically switched on during
commissioning of the storage system. Access to the
system is password protected.
An Internet connection is required for remote access.
Info
If the Activate remote password protection
checkbox is activated, the remote access password
protection is automatically switched on. For security
reasons, the manufacturer recommends leaving the
password protection activated and changing the
standard password 0000 after you have logged in for
the first time.
Changing the settings | 65
Storage system | User manual