Displaying The Data Via The Remote Access Function - Bosch BPT-S 5 Hybrid User Manual

English
Bosch Power Tec GmbH
4.3.2 Displaying the data via the remote access
function
Prerequisites
The storage system and the computer are in the

same network.
You know the password.

The remote access function is password protected
as standard. When you log in for the first time, use
the standard password 0000.
▶
Procedure
1. Start your Internet browser
2. Enter the IP address of the storage system
Info
You can find the storage system IP address in the
General information menu on the EMS.
3. Press Enter
A window with a number pad opens.
4. Enter the password
Info
For security reasons, you should change the standard
password after you have logged in for the first time.
You can find out how to change the password in
Changing the remote password, p. 66.
5. Click OK
The start page of the storage system opens.
■
The storage system data is displayed.
Operation | 41
Storage system | User manual