Operation; Switching On The Storage System - Bosch BPT-S 5 Hybrid User Manual

English
Bosch Power Tec GmbH
4

Operation

4.1

Switching on the storage system

Prerequisites
 Measurements are carried out according to the
standard DIN EN 62446.
▶
Procedure
1. Open the housing door
2. Turn the On/Off switch to On
On/Off switch (1)
4.1:
3. Close the housing door on the storage system
The storage system program starts up
automatically. This may take some time: A rotating
hourglass is displayed.
You will hear several clicking sounds.
Only during the initial commissioning of the
storage system: The commissioning wizard
launches.
4. Follow the on-screen instructions of the
commissioning wizard
Info
Once you have completed the instructions in the
commissioning wizard, this is not repeated when the
system is restarted.
■
The storage system has been switched on.
(1)
Storage system | User manual
Operation | 37