Teleprotection Inputs; Contact Outputs; Virtual Outputs; Rxgoose Status - GE C30 Instruction Manual

STATUS

6.2.5 Teleprotection inputs

ACTUAL VALUES  STATUS  TELEPROTECTION INPUTS
 TELEPROTECTION
 INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed is
that of corresponding remote output unless the channel is declared failed.

6.2.6 Contact outputs

ACTUAL VALUES  STATUS  CONTACT OUTPUTS
 CONTACT OUTPUTS

The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
6
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.

6.2.7 Virtual outputs

ACTUAL VALUES  STATUS  VIRTUAL OUTPUTS
 VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.

6.2.8 RxGOOSE status

ACTUAL VALUES  STATUS  RxGOOSE STATUS
 RxGOOSE STATUS

6-4
TELEPROTECTION

INPUT 1-1: Off

TELEPROTECTION

INPUT 1-16: Off
TELEPROTECTION

INPUT 2-1: Off

TELEPROTECTION

INPUT 2-16: Off
Cont Op 1

Off

Cont Op xx

Off
Virt Op 1

Off

Virt Op 96

Off
All RxGOOSE Online:

Yes
CHAPTER 6: ACTUAL VALUES
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off
Range: On, Off
Range: Yes, No
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL