Level:
SA
Description
Use
Program 90-03 : Save Data
should be used after changing the programmed data.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Input Data
Item No.
01
Data Save
02
DIM Log Save
03
Save Statistical Information for
RTP
Conditions
When reloading a customer database, the system must be reset (either using Program 90-08 or
power down/power up) before all uploaded programming takes affect.
Feature Cross Reference
None
2-816
Program 90 : Maintenance Program
to save the programmed data on the USB Flash Drive. This program
Item
Dial 1 + press Transfer (Press Transfer to cancel.)
Dial 1 + press Transfer to copy DIM log from SD Drive to USB
drive.
Dial 1 + press Transfer to copy RTP Statistical Information file
from SD Drive to USB drive.
90-03 : Save Data
Input Data
Program 90 : Maintenance Program
Issue 4.0