Dial Analysis Table For Ars/F-Route Access - NEC univerge SV9100 Programming Manual

44-02 : Dial Analysis Table for ARS/F-Route Access

Level:
IN
Description
Use
Program 44-02 : Dial Analysis Table for ARS/F-Route Access
selecting ARS/F-Route.
Input Data
Dial Analysis Table Number
Item
No.
01
Dial
Dial digits to be analyzed by the system.
02 Service Type
Service Type 1 (Extension Number)

The number goes to an extension after deleting
the front digit(s).
Additional Data
Assign the digit(s) to be deleted on top of the
number for extension number usage. At least
one digit must be deleted.
Service Type 2 (ARS/F-Route)

The number is controlled by ARS/F-Route table.
Additional Data:
If the ARS/F-Route Time Schedule is not used,
assign the ARS/F-Route table number for
Program 44-05.
If the ARS/F-Route Time Schedule is used,
assign the ARS/F-Route selection number for
Program 44-04.
Service Type 3 (Dial Extension Analyze Table)

The total length of the number exceeds more
than 8 digits.
Additional Data:
Assign the Dial Extension Analysis Table number
to be used in Program 44-03.
2-550
Program 44 : ARS/F-Route Setup
Item
to set the Pre-Transaction Table for
1~120
Input Data
Up to eight digits
(Use line key 1 for a Don't Care
digit, @)
0 = No setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
Program 44 : ARS/F-Route Setup
Issue 4.0
Default
No
Setting
0