NEC univerge SV9100 Programming Manual page 485

Issue 4.0
Function
Function
Number
22 Internal All Call Paging
23 Meet-Me Answer to Internal
Paging
24 Call Pickup
25 Call Pickup for Another
Group
26 Call Pickup for Specified
Group
27 Speed Dial – System/Private
28 Speed Dial – Group
29 Repeat Redial
30 Saved Number Redial
31 Memo Dial
32 Meet – Me Conference
33 Override (Off-Hook
Signaling)
34 Barge – In
35 Camp On
36 Department Step Call
37 DND/FWD Override Call
38 Message Waiting
39 Room Monitoring
40 Handset Transmission Cutoff
SV9100 Programming Manual
Function Number List (Continued)
[1] General functional level (00~99)
Additional Data
Call Pickup Group Number
Speed Dial Number
(Speed/Private)
Speed Dial Number (Group)
No data or Extension No. (not
Virtual Extension) or

case of refer to the

Extension No. (not Virtual
Extension) set in 24-09-03.
LED Indication
None
None
None
None
None
None
None
Rapid Blink (Red): Under a Repeat
Dial
None
None
None
None
None
. In
Red On: Under Camp-On or Reservation
None
None
None
Rapid Blink (Red): Under Monitored
Slow Blink (Red): Under Monitoring
With Room Monitor there are two parties in
the monitor, one being monitored and one
who is monitoring. The same key is used
on both phones, but the COS says if the
key is set to be either a monitored or
monitoring party.
Red On: Transmission cut-off
2-445