Fig. 3-18
5. First choose the appropriate Active Line Module from the Selection field
according to type (Order No.) (see type plate), assign a name (Supply_1),
and click the Line filter available field.
6. Click Continue > to select additional data for the Active Line Module (infeed)
(see Fig. 3-19).
Fig. 3-19
7. Adapt the supply voltage and rated line frequency for the device accordingly.
Click Continue >.
Siemens AG 2006 All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
SINAMICS_CU320 configuration for the Active Line Module
Infeed: Additional data
Creating the Drive Project OFFLINE
3-45