Fig. 3-5
7. The system has determined the available interfaces on your PC (e.g. CP5511
(PROFIBUS)). Choose an interface from the Interface Parameter Assignment
Used selection field and then click Properties.
Fig. 3-6
8. Enter the following properties in the Properties – CP5511 (PROFIBUS) dialog
box (see Fig. 3-6):
– Click the field PG/PC is the only master on the bus.
Siemens AG 2006 All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Setting up the PG/PC interface: properties
Properties – CP5511 (PROFIBUS)
Creating the Drive Project OFFLINE
3-35