Display Key Menu Operations; Display Key Menu Operation; Display Key Menu; Display Key Menu List - Sony PCM-7040 Operation Manual

7-2 DISPLAY Key Menu Operations

7-2-1 DISPLAY Key Menu

Operations
There are the following three methods to change the
display.
• Press the DISPLAY menu key on the front panel
• Turning the search dial while holding down the
DISPLAY menu key.
• Press the FF/REW keys while holding down the
DISPLAY menu key.
7-2-2 DISPLAY Key Menu
LOCATE POINT
LOCATE POINT (Program number)
PNO
ELAPSE
EXT TIME CODE
GEN TIME CODE
GEN SET TIME
VARI SPEED
CHASE OFFSET
rEno (RENUMBER)
CUE SPEED
7-4
Chapter 7 Menu Operations
U-BIT
EXT U-BIT
GEN U-BIT
GEN SET U-BIT

7-2-3 DISPLAY Key Menu List

DISPLAY key Functions
menu
LOCATE POINT Sets the time code of the locate point
for the time code locate operation.
LOCATE POINT Sets the Program number for the locate
(Program number) point or search for the End ID.
PNO Sets the program number to be
recorded simultaneously with a start ID.
ELAPSE Displays the tape running timer
(elapsed time). You can reset this value
using the RESET key.
U-BIT Displays the user bit read from the tape
during playback.
EXT TIME CODE Displays the external time code input to
the unit.
EXT U-BIT Displays the user bit of the external
time code input to the unit.
GEN TIME CODE Displays the internal generator time
code.
GEN U-BIT Displays the user bit of the internal
generator time code.
GEN SET TIME Sets the start time value of the internal
time code generator.
GEN SET U-BIT Sets the contents of the user bit of the
internal time code generator.
VARI SPEED Sets the tape speed for variable-speed
playback, and displays the set data.
CHASE OFFSET Sets the offset value for chase
synchronized operation, and displays
the set data.
rEno Renumbers the Program numbers into
(RENUMBER) order, or numbers a Start ID which was
not recorded with a Program number.
CUE SPEED Displays the cue speed when the unit is
in cue mode.