Recalling the stored data
You can recall the stored data, factory-set data, and
preset data. You can operate this unit by the recalled
data.
1
Turn the search dial while holding the MENU key
down and set the display to :"- -rcL - -".
2
Turn the search dial while holding the DATA key
down to select recalling data.
3
Press the SET key.
Flashing stops and the data are recalled.
Calling data setup from the setup menu
automatically at power on
Set the setup menu "- - SEt uP - -".
3
1,2
7-3
Chapter 7 Menu Operations