Figure 4-41 . Typical List Display In Compare Trace Mode - HP 1630A Operating And Programming Manual

State Measurements
Model 1630A/D/G
[Continuous] LIST DISPLAYS
The list in the continuous trace mode is like the list in the single trace mode, except that "Continuous Trace in
Process" appears at the top . In this mode, the analyzer makes a continuous series of single traces, updating the
display each time it completes a trace. The content of the list will change as each new trace is completed if the
display is updated with different information . To stop a continuous trace, press the STOP key. This causesthe
analyzer to complete its trace in progress and not start a new trace.
[Compare] LIST DISPLAYS
Figure 4-41 shows a typical display that may be obtained in the [Compare/Edit or Full Compare] mode . On the
top line, either the display of [ State ] or [State+Compare] may be selected . If [ State ] is selected, the display
will show only the content of the trace memory, just as you would see in the [Single] trace mode . The
[State+Compare] display is unique to the [Compare/Edit or Full Compare] trace modes .
Display Control Fields
[Overview] LIST DISPLAYS
Figure 4-41 . Typical List Display In Compare Trace Mode
[Mark] :
places integrated display of trace list and Compare list on screen .
[Show] :
places only lines of Compare List on screen in [Show] mode or marks lines of
Compare List in [Mark] mode .
[Compare Image] :
all lines of Compare List can be on screen .
[Differences] :
only lines of Compare List that are different from corresponding lines in trace list
can be on screen in [Show] mode or marked in [Mark] mode .
List or waveform displays may not be obtained when the analyzer is making an overview measurement.
Listing --------- INSERT to Add Compare Item__-
Islt
Labe1>
Base >
ADDRS ADDR1
®
DATA
®
CNTRL
f
WR-RD MEMRY
-0006 BOOT +0433 0433
<STX> 0111 READ IH-OT
-0007 BOOT +0433 0433 w 0111 READ
IH-OT
-0006
BOOT +0102 01132 ( 0101 WRITE IN-OT
-0005 BOOT +0105 0105
0 0101 WRITE IN-OT
-0004 BOOT +01D8 01 D8 8 0101 WRITE
IN-OT
-0003
BOOT +01DB 010B <SOH> 0101 WRITE IN-OT
-0002 BOOT
+01DB 01DB 0101 WRITE IN-OT
BOOT +0429 0429 0 0111
READ IN-OT
+0000
BOOT +0429 0429 <DC3> 0111 READ IN-OT
+0000* BOOT 1 +=
+0001
BOOT +0431 0431 2 0111 READ IN-OT
+0002 BOOT
+0431 0431 a 0111 READ IN-OT
+0003 BOOT
+0433 0433 (57X0 0111 READ IN-OT
+0004
BOOT +0433 0433 0111 READ
IN-OT
+5005
BOOT +0102 0102 (
0101 WRITE IN-OT
+0006
BOOT +0105
01115 <ES ) 0151 WRITE IN-OT