Replacing The Grass Deflector - Toro 74919TE Operator's Manual

Figure 105
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in Figure
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
106.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position.
9. Slide the deck out to the right side of the machine.

Replacing the Grass Deflector

WARNING
An uncovered discharge opening could allow the
lawn mower to throw objects at you or bystanders,
resulting in serious injury. Also, contact with the
blade could occur.
Do not operate the lawn mower unless you install a
cover plate, mulch plate, grass deflector, or bagger.
1. Remove the locknut, bolt, spring, and spacer holding
the deflector to the pivot brackets
2. Remove the damaged or worn grass deflector
107).
64
Figure 106
(Figure 107).
(Figure