Sound Pressure; Sound Power; Vibration Level - Toro 74919TE Operator's Manual

Hide thumbs Also See for 74919TE:
Table of Contents

Advertisement

Slope Operation
Do not mow slopes greater than 15 degrees.
Do not mow near drop-offs, ditches, steep banks, or
water. Wheels dropping over edges can cause rollovers,
which may result in serious injury, death, or drowning.
Do not mow slopes when grass is wet. Slippery
conditions reduce traction and could cause sliding and a
loss of control.
Do not make sudden turns or rapid speed changes.
Use a walk behind mower and/or a hand trimmer near
drop-offs, ditches, steep banks, or water.
Reduce speed and use extreme caution on slopes.
Remove or mark obstacles such as rocks, tree limbs, etc.
from the mowing area. Tall grass can hide obstacles.
Watch for ditches, holes, rocks, dips, and rises that change
the operating angle, as rough terrain could overturn the
machine.
Avoid sudden starts when mowing uphill, because the
mower may tip backward.
Be aware that loss of traction may occur going downhill.
Weight transfer to the front wheels may cause drive
wheels to slip and cause loss of braking and steering.
Always avoid sudden starting or stopping on a slope.
If tires lose traction, disengage the blades and proceed
slowly off the slope.
Follow the manufacturer's recommendations for wheel
weights or counterweights to improve stability.
Use extreme care with grass catchers or other attachments.
These can change the stability of the machine and cause a
loss of control.

Sound Pressure

Model 74919TE has a sound pressure level at the operator's
ear of 92 dBA, which includes an Uncertainty Value (K) of
1 dBA.
Model 74925TE has a sound pressure level at the operator's
ear of 93 dBA, which includes an Uncertainty Value (K) of
1 dBA.
The sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.

Sound Power

Model 74919TE has a guaranteed sound power level of 105
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Model 74925TE has a guaranteed sound power level of 105
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.

Vibration Level

Model 74919TE
Hand-Arm
Measured vibration level for right hand = 1.3 m/s
Measured vibration level for left hand = 1.5 m/s
Uncertainty Value (K) = 0.8 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.32 m/s
Uncertainty Value (K) = 0.16 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Vibration Level
Model 74925TE
Hand-Arm
Measured vibration level for right hand = 2.7 m/s
Measured vibration level for left hand = 3.2 m/s
Uncertainty Value (K) = 1.6 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.73 m/s
Uncertainty Value (K) = 0.37 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
6
2
2
2
2
2
2
2
2
2
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master professional 6000 series74925te

Table of Contents