Safety And Instructional Decals - Toro 22337CP Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Crushing hazard—install the cylinder lock and read the instructions before servicing or performing maintenance.
2. Warning—remove the ignition key and lower the loader arms before leaving the machine.
3. Cutting hazard of hand—wait for moving parts to stop.
4. Crushing/dismemberment hazard of bystanders—keep bystanders a safe distance from the machine.
5. Explosion and electrical shock hazards—do not dig in areas with buried gas or electrical lines.
1. Warning—read the
Operator's Manual.
2. Tipping hazard—do not
step off operator platform
with load raised, always
operate with the heavy end
of the machine pointed
uphill, carry loads low,
maximum load is 515 lbs
(234 kg).
3. Arm lift–down
4. Arm lift— up
5. Wheel drive—forward
6. Wheel drive—reverse
114–9600
100-1701
108-9733
7. Bucket tilt— down
8. Bucket tilt—up
9. Engine—start
1. Hydraulic oil
2. Read the Operator's Manual.
9
10. Engine—run
11. Engine—stop
93-6686