Table Of Contents; Introduction - Toro 22337CP Operator's Manual

DANGER
There may be buried power, gas, and/or telephone
lines in the work area. Shock or explosion may
occur if you dig into them.
Have the property or work area marked for buried
lines and do not dig in marked areas. Contact your
local marking service or utility company to have the
property marked (for example, in Australia, call
1100 for the nationwide marking service).

Introduction

This machine is a compact utility loader intended for
use in various earth and materials moving activities for
landscaping and construction work. It is designed to
operate a wide variety of attachments each of which
perform a specialized function.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
© 2011-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1
G014951
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Safe Operating Practices ....................................... 3
Stability Data........................................................ 7
Slope Indicator..................................................... 8
Safety and Instructional Decals ............................. 9
Setup.......................................................................... 12
1 Installing the Valve Lever ................................. 12
2 Checking Fluid Levels ...................................... 12
3 Installing the Battery........................................ 12
Product Overview ...................................................... 14
Controls ............................................................. 14
Specifications ..................................................... 17
Attachments/Accessories................................... 17
Operation................................................................... 18
Filling the Fuel Tank........................................... 18
Draining Water from the Fuel Filter..................... 18
Checking the Engine Oil Level............................ 19
Checking the Engine Coolant Level .................... 19
Removing Debris from the Traction
Unit................................................................ 19
Checking the Hydraulic Fluid Level..................... 20
Testing the Parking Brake ................................... 20
Checking the Tire Pressure ................................. 21
Starting the Engine............................................. 21
Driving the Traction Unit ................................... 21
Stopping the Traction Unit/Engine .................... 21
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved