Panasonic KX-TDA100 Pc Programming Manual page 795

Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the
PBX detects a PBX error, the System Alarm button on the PT turns on red. When this button is
pressed, the display will show the error number, and the button light will turn off automatically.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.4.3 Local Alarm Information
Daily Test Start Time—Set
Enables the daily self check of the PBX for local alarm and error log.
Value Range
Disable, Enable
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.4.3 Local Alarm Information
Daily Test Start Time—Hour
Specifies the hour of the PBX daily self check start time.
Value Range
0–23
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
2.18 [11] Maintenance
PC Programming Manual 795