10-5] Miscellaneous - Panasonic KX-TDA100 Pc Programming Manual

2.17 [10] CO & Incoming Call

2.17.7 [10-5] Miscellaneous

The Intercept Routing feature can activate when the destination of an incoming call is unavailable, or
when there is no destination for the call, to reroute the call to an alternate destination.
Intercept—Intercept Routing - DND (Destination sets DND)
Enables the Intercept Routing—DND feature to activate when the original destination is in DND
mode.
Value Range
Disable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT/ELCOT or
T1 [LCOT/GCOT] card will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Maintenance Console Location
2.17.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.6 Intercept Routing
1.3.1.3 Do Not Disturb (DND)
Intercept—Routing to Operator - No Destination (Destination is not
programmed)
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the
call. (The Intercept Routing—No Destination feature always works for calls through an LCOT/ELCOT
or T1 [LCOT/GCOT] card, even when this feature is disabled.)
Value Range
Disable (Reorder Tone): Sends a reorder tone to the caller
Enable: Redirects the call to an operator
Maintenance Console Location
2.17.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.7 Intercept Routing—No Destination
Intercept—Intercept Routing for Extension Call
Enables the Intercept Routing feature to operate for extension calls.
782 PC Programming Manual