Panasonic KX-TDA100 Pc Programming Manual page 576

2.11 [4] Extension
Programming Manual References
2.8.6 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Guide References
None
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension
at the moment that the extension goes on-hook for the previous call.
Value Range
Disable, Enable
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT.
Note that for KX-TDA30, the setting of this parameter is only effective when a resource for sending
extension Caller ID is assigned in Extension Caller ID Resource-1, 2 (KX-TDA30 only) for the port
in 2.9.18 [2-10] Extension CID Settings.
Value Range
Disable, Enable
576 PC Programming Manual