Serial Parameter Defaults - Motorola PL3307 Integration Manual

8 - 2 PL3307 Decoder Integration Guide

Serial Parameter Defaults

Table 8-1 lists the defaults for serial host parameters. To change any option, scan the appropriate bar code(s)
provided in the Serial Host Parameters section beginning on
NOTE See
miscellaneous default parameters.
Serial Host Default Table
Table 8-1
Serial Host Parameters
Serial Host Types
Baud Rate
Parity Type
Stop Bits
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, Standard Default Parameters
Parameter
page 8-3.
for all user preferences, hosts, symbologies, and
Default
Standard RS-232 8-5
9600 8-7
None 8-9
1 8-10
8-Bit 8-10
Enable 8-11
None 8-12
None 8-14
2 Sec 8-16
Low RTS 8-17
Disable 8-17
0 msec 8-18
Normal Operation 8-19
Send Bar Code 8-19
Page
Number