T1 Settings Added for Networking
Parameter
Description
Address
Options
Parameter
Description
Address
Options
Parameter
Description
Address
Options
Note
Page 92
Outpulse Delay Timer
Sets the time after receiving a wink before outpulsing
digits.
FF1 8# 4# 8# 3# (NWG)# 11# (0-8)#
0=1200 ms min
1=1200 ms min
2=1200 ms min
3=1200 ms min
4=1200 ms min
Wink Signal Wait Timer
Sets the time to wait for a wink to be received.
FF1 8# 4# 8# 3# (NWG)# 12# (0-15)#
0=150 ms
1=250 ms
2=500 ms
3=750 ms
4=1000 ms
5=1250 ms
6=1500 ms
7=1750 ms
Wink Signal Delay Answer Timer
Sets the time to wait before sending a wink.
FF1 8# 4# 8# 3# (NWG)# 13# (0-15)#
(See Note Below)
0=80 ms
1=90 ms
2=100 ms
3=120 ms
4=130 ms
5=140 ms
6=150 ms
7=160 ms
An incoming call detection and processing time must be
added to determine the actual time before a wink signal is
sent back. Typically this time is from 110-120 ms. For
instance, if the Wink Signal Delay Answer Timer is set to
100 ms, the actual wink will occur after approx. 210 ms.
T1 Networking-Revised April 2000
Programming
5=1400 ms
6=1700 ms
7=1900 ms
8=2200 ms
8=2000 ms
9=2500 ms
10=3000 ms
11=3500 ms
12=4000 ms
13=4500 ms
14=5000 ms
15=5500 ms
8=170 ms
9=180 ms
10=190 ms
11= 200 ms
12=210 ms
13=220 ms
14=230 ms
15=240 ms
DBS-2.3/9.2-540