Samsung OfficeServ 7100 Installation Manual page 84

OfficeServ 7100
TECHNICAL MANUAL
HOW TO CONNECT TO A PHONE
1. Separate the cradle at the back of the
phone.
2. Mount the Gigabit Adaptor onto the
back of the body.
NOTE: The back of the Gigabit Adaptor
is sharp, so take care to avoid injury.
When you connect the Gigabit Adaptor
to the IP phone which is currently in use,
disconnect the PC cable connected to
the IP phone, and connect it to the G-PC
port of the Gigabit Adaptor. This will
leave the PC connection port, usually
used for the IP phone, vacant.
7.20
Home Page Table of Contents
INSTALLATION
PART 7 MAY 2010