Siemens Gigaset A580 IP Manual page 81

ECO DECT: Reducing the power consumption and transmission power of the base station
Activating/deactivating Eco mode / Eco mode+
¢
§Menu§
Eco mode / Eco mode+
Signal displays
Screen icon
Ð i Ñ Ò
| (flashes)
¼
Please note
u
With Eco mode+ enabled, dial a phone number to check access to the base sta-
tion. You will hear the ringing tone if the base station can be reached. The signal
strength icon will be displayed.
u
When Eco mode+ is enabled:
call setup will be delayed by approx. 2 seconds.
handset standby time will be reduced by approx. 50%.
u
Registering handsets that do not support Eco mode+ will cause the mode to be
deactivated.
u
Activating Eco mode reduces the range of the base station.
u
Eco mode
out, i.e. both functions cannot be used at the same time.
80
¢ ¢
Settings Base
§OK§
Select and press
Signal strength:
– good to poor
– no signal
Eco mode+ enabled
A short while after the Eco mode+ is activated, the ¼ icon
replaces the signal strength icon in the top left-hand cor-
ner of the handset in idle display mode.
Eco mode+ and repeater support (
/
Additional Features
(‰ = on).
£
Page 98) cancel each other