Operating the base station on the PABX
The following settings are only necessary when your PABX requires them; see the
PABX user guide. The settings only affect fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.
Changing the dialling mode
You can set the dialling mode.
¢
§§Menu§
Tone / PulseSelect and press
a
Please remember
u
Suffix dialling (for selecting the connection) is not possible in conjunction with
pulse dialling: a hash "#" is displayed during dialling but ignored when pulse
dialling is used.
u
Enter an asterisk "*" to switch temporarily to tone dialling. The asterisk is not
displayed.
Setting recall
Your phone is preset at the factory for operation on the main connection (recall 250
ms). For operation on a PABX, you may have to change this value. Please refer to the
user guide for your PABX.
¢
§Menu§
q
The current setting is indicated by ‰.
a
Setting access codes (external line prefixes)
Depending on your PABX, you must dial an access code before making external
calls in order to obtain an external line. You can store this access code in your
phone. It is then added automatically to the numbers, e.g. when dialling using the
calls list.
¢
§Menu§
Access Code
~
a
¢
¢
Settings
Base
§OK§
Press and hold (idle status).
¢
¢
Settings
Base
Select recall and press
Press and hold (idle status).
¢
¢
Settings
Base
§OK§
Select and press
Enter or edit the access code (maximum three digits) and press
Press and hold (idle status).
Operating the base station on the PABX
¢
Telephony
Fixed line
(‰ = on).
¢
Telephony
Fixed line
§OK§
.
Additional Features
.
¢
Dialling Mode
¢
Recall
§OK§
.
105