Network Attendant Reversion; Network Call Routing; Network Call Transfer; Network Centralized Attendant - Panasonic DBS576 Technical Manual

Chapter 3. System Features
• Network Centralized Voice Mail (Version 2.5 and higher)
• Networking Extension Calling
• Network Flash Transfer (Version 2.5 and higher)
• Network Hold (Version 2.5 and higher)
• Network Paging
• Network Transfer Recall (Version 2.5 and higher)
• Tandem Calling
For more information on System Networking, see the System Networking Reference Manual.

Network Attendant Reversion

Network Attendant Reversion enables calls to revert to the attendant in the same cabinet. Calls will
not revert if the cabinet receiving the call has no attendant. Network Attendant Reversion does not
work with Network Hold.

Network Call Routing

Network Call Routing allows multiple systems that are interconnected in a network, to direct calls to a
specific tie line based on the number dialed. The call does not leave the network.

Network Call Transfer

Network Call Transfer allows a call at an extension to be transferred to another extension in the
network.

Network Centralized Attendant

Network Centralized Attendant allows one primary attendant group in the network to handle network
attendant calls.
Related Programming
• FF6-2-07: Closed Numbering

Network Centralized Voice Mail

Network Centralized Voice Mail allows one primary voice mail system to support the network. (This
feature does not apply to integrated Voice Mail or Built-In Voice Mail.)
Related Programming
• FF6-2-04: Route Table: Digit Modify Pattern No.
• FF6-2-05: Digit Modify Table - Add Ending Digits
• FF6-2-05-0005: Numbering Plan
• FF6-2-06: Authorization Code (UK Only)
• FF6-2-09-0001: Dialing Access Voice Mail System
• FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)
• FF8-1-05: Call-Forward ID Codes for Voice Mail
• FF8-1-06: MSG Key ID Codes (USA only)

Network Extension Calling

3-46 DBS 576 (USA) issued October 2000
Section 700 - Operation
576-36-700