Panasonic DBS576 Technical Manual page 159

Section 700 - Operation
The System provides two types of call waiting:
• Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal to
the busy extension. You need only to remain on the line.
• Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy
extension.
Beginning with CPC version 2.0, you can leave a text message that displays on the busy phone. Any
one of the following messages can be selected. Messages 6 to 9 and 0 have no default message text.
All the messages can be changed through system programming. (See "Set Send Text Messages" on
page 4-23 for more information on setting Send Text Messages).
Table 5-3. Send Text Messages
Message No.
1
2
3
4
5
Also, beginning with CPC version 2.0, the busy party can reply with a text message that displays on
the camping on phone. Any one of the following messages can be selected. Messages 6 to 9 and 0
have no default message text. All the messages can be changed through system programming. (See
"Set Text Message Replies" on page 4-37 for more information on setting Text Message Replies).
Table 5-4. Text Message Replies
Message No.
1
2
3
4
5
Operation
To use Automatic Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Remain on the line until the called party answers.
576-36-700
Message Text Message No.
Visitor Here
Need Help
Important
Urgent
Emergency
Message Text Message No.
Take A Message
Please Hold
Will Call Back
Transfer
Unavailable
Action
DBS 576 (USA) issued October 2000
Chapter 5. Key Telephone Features
Message Text
6 User Defined
7 User Defined
8 User Defined
9 User Defined
0 User Defined
Message Text
6 User Defined
7 User Defined
8 User Defined
9 User Defined
0 User Defined
Intercom dial tone
• Wait XXX displays (where XXX =
extension number/name)
• Called party hears alert tone from the
speaker.
• Calling party hears ringback tone
Result
5-35