Line Appearances; Dss/Blf Appearances - Panasonic DBS576 Technical Manual

Section 700 - Operation
Operation
To automatically redial the last number dialed:
1. Lift the handset or press the ON/OFF key.
OR...
Press a vacant CO key or enter a trunk access code.
2. Press the REDIAL key.
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO calls or CO calls only.

Line Appearances

Description
The System provides three types of line appearances
• Direct Station Select (DSS) / Busy Lamp Field (BLF) Appearances
• Direct Line (DL) Appearances
• MCO Line Appearance

DSS/BLF Appearances

When a DSS/BLF key is programmed, it automatically provides one-touch dialing and DSS and BLF
for the assigned extension numbers. If desired, the DSS/BLF key can also provide ring or delayed ring
monitor. For example, you can set extension A as a DSS/BLF ringing key on extension B. When
extension A rings, the LED of the DSS/BLF key on extension B flashes and the phone rings.
Ringing or delayed ringing can be set on extensions which have a BLF key. The LED of the DSS/BLF
key flashes green during ringing and the display shows the BLF extension number.
When extension A is in use, the LED of the DSS/BLF key on extension B lights red. If one extension
has the Call Forwarding or Do-Not-Disturb (DND) feature activated, the DSS/BLF key lights green.
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 5. Key Telephone Features
Result
• Outside dial tone
• CO XXX displays (where XXX = trunk
number)
Last number dialed displays
Line key LED turns red, then goes off.
5-61